Kamoer fluid tech(Shanghai)Co., Ltd. UIP WIFI User Manual
9
tube type. Each tube type has a corresponding relationship between the speed and the flow rate. If
not, the tube type can be performed in the system setting->tube type. calibration;
b, Flow rate setting:
click to set the flow rate of the ration mode;
c. Liquid level detection:
Click the liquid level detection to enter the liquid level detection setting
interface, set the liquid level detection on and off in the liquid level detection setting interface, the
type of alarm; if the liquid level detection is on, when the pump works, if When the liquid level
alarm is detected, the pump stops working and an alarm is given;
d. Foot switch:
Click to switch the opening and closing of the foot switch control. If the foot
switch is turned on, the continuous mode can be controlled to start and stop by the foot switch;
e, fully automatic cycle / semi-automatic cycle:
click to switch automatic mode and
semi-automatic mode;
f, Number of clearing:
Click to clear the number of times of automatic cycle and semi-automatic
cycle;
Figure 2-2-1-2 Allocation mode tube type selection
2.2.2 Ration mode level detection setting
If the liquid level detection is on, when the pump is working, if the liquid level alarm is
detected, the pump stops working and an alarm prompt is given; in the dispensing mode, click
Settings -> Level Detection to enter the dispense mode level detection setting. interface: