3. Save Preset: Press the ‘Right’ button to save
current configuration to preset, press ‘Up’ or ‘Down’
button to select storage location, press the
‘Right’ button to confirm this operation.
4. Recall Preset: Press the ‘Right’ button to recall
previous preset, press ‘Up’ or ‘Down’ button to select
preset you want, press the ‘Right’ button to confirm
this operation.
5. View IP: Press the ‘Right’ button to check IP
address and DHCP status.
6. Select Baud: Press the ‘Right’ button, then press
the ‘Up’ or ‘Down’ button to select baud, press the
‘Right’ button to confirm this operation.
7. Factory Reset: Press the ‘Right’ button to setting
factory reset status, then press the ‘Right’ button to
confirm this operation or the ‘Left’ button to quit this
operation.
The EDID table:
EDID Mode
EDID Description
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
720P 2.0 CH
1080P 2.0 CH
1080P 5.1 CH
1080P 7.1CH
1080I 2.0 CH
1080I 5.1 CH
1080I 7.1CH
3D 2.0 CH
3D 5.1 CH
3D 7.1 CH
4K*2K@30 2.0 CH
4K*2K@30 5.1 CH
4K*2K@30 7.1 CH
4K60_420 2.0CH
4K60_420 5.1CH
4K60_420 7.1CH
4
Power and
Power LED
Long press this button to power on/off device. The LED
will illuminate in green when the device is power on
and show in red when this device is standby.
4/19
