s all hdcp off!
Force shutdown hdcp of the all output port
all out hdcp off
s all hdcp auto!
Automatic management hdcp of all output port
all out hdcp auto
r hdcp in x!
Get the Hdcp state of the x input port
a hdcp in
r hdcp out x!
Get the Hdcp state of the x output port
a hdcp out
r hdcp all in!
Query all input port HDCP status
a hdcp in all
r hdcp all out!
Query all output port HDCP status
a hdcp out all
s beep on!
Open buzzer function
beep on
s beep off!
Cancel buzzer function
beep off
r beep!
Get the switch state of the buzzer
a beep on
s lock on!
Panel lock
lock on
s lock off!
Panel unlock
lock off
r lock!
Get the status of the panel key lock
a lock on
s power on!
Machine boot
power on
s power off!
Machine shutdown
power off
r power!
Query power state
a power on
s rboot!
Machine reboot
rboot
s factory reset! Restore factory settings
r type!
Query matrix model
a HDM-B88
r version!
Query software version
a aa.bb-aa.bb-aa.bb
r status!
Query the status of the entire machine
s dhcp off!
Set up network module using static IP
s dhcp on!
Set up network modules using dynamic IP
r dhcp!
Get the Dhcp status of the network module
a ip mode DHCP
ip mode DHCP
s ip addr a.b.c.d! Set the IP address of the network board
a.b.c.d
s mac addr a-b
-c-d-e-f
！
Set the MAC address of the network board
a-b-c-d-e-f
s subnet a.b.c.d!
s port 8000!
Set control port at 8000
8000
factory reset
a aa.bb-aa.bb-aa.bb.cc.dd
ip mode static
Setting subnet mask of network module
a.b.c.d
s gateway a.b.c.d!
Set up network module gateway
a.b.c.d
RS-232 Command
Function description
Feedback
17/19
