Kambrook KBL330, Инструкция пользователя

Страница: 9 / 24

8
8. Remove the silicone seal from
the Removable Blade Holder
(See. Fig. 3).
Fig. 3
NOTE:
The blending blades
are extremely sharp. Avoid any
contact with fingers and hands.
Assembling and Attaching
the Blender Jug
1. Place the motor base on a flat,
dry surface such as bench top.
Ensure the Speed Control Dial is in
the ‘OFF’ position, the appliance
is switched off at the power outlet
and the power cord is unplugged.
2. Ensure the lid is off the blender jug
and place the blender jug upside
down on a flat, dry surface such
as a bench top.
3. Place the silicone seal onto the
Removable Blade Holder. Make
sure the silicone seal sits under the
grooves (See Fig. 4).
Fig. 4
4. Tilt the Removable Blade Holder
at an angle and put it inside the
jug.
5. Using the inner measuring
cap, insert the two tabs on the
Removable Blade Holder
(See Fig. 1).
6. Use one hand to hold the jug
handle and the other to turn
the inner measuring cap anti-
clockwise to ‘ ’ and secure
the Removable Blade Holder
in place.
7. Place the assembled blender into
the motor base. The blender is
designed to sit inside the motor
base, it does not lock to the
motor base.
8. Place the lid on top of the
blender jug and push down to
seal. Insert the inner measuring
cap into the middle opening
of the blender jug lid and turn
clockwise to lock.
Operating Your Kambrook Blender
Continued...