Kambrook KBL330, Инструкция пользователя

Страница: 5 / 24

4
Kambrook Recommends Safety First
IMPORTANT: Please retain your
instruction book for future use.
At Kambrook, we believe that safe performance is the first priority in any
consumer product, so that you, our valued customer can confidently
use and trust our products. We ask that any electrical appliance that
you use be operated in a sensible fashion with due care and attention
placed on the following important operating instructions.
Important Safeguards For Your Kambrook
Blender
• Carefully read all instructions before
operating the blender for the first time and
save for future reference.
• Remove and safely discard any packaging
material and promotional labels before using
the blender for the first time.
• To eliminate a choking hazard for young
children, remove and safely discard the
protective cover fitted to the power plug of
this blender.
• Do not place the blender near the edge of a
bench or table during operation. Ensure the
surface is level, clean and free of water and
other substances. Vibration during operation
may cause the blender to move.
• Do not use the blender on a sink drain board.
• Do not place the blender on or near a hot
gas or electric burner, or where it could
touch a heated oven.
• Handle the blender and attachments
with care – remember the blades are razor-
sharp and should be kept out of the reach
of children.
• Always ensure the blender is completely
assembled before operating. The blender
will not operate unless properly assembled.
• Do not use attachments other than those
provided with the blender.
• Do not attempt to operate the blender by
any method other than those described in
this booklet.
• Always secure the blade assembly onto
the blender jug before attaching to the
motor base.
• Ensure the Speed Control Dial is in the ‘OFF’
position and the blender is switched off
at the power outlet and the power cord
is unplugged before attaching the
blender jug.
• Always operate the blender with the blender
jug lid in position.
• Keep fingers, hands, knives and other utensils
away from moving blades.
• Do not place hands or fingers into the
blender jug unless the motor and blades
have come to a complete stop. Ensure the
Speed Control Dial is in the ‘OFF’ position
and the blender is switched off at the power
outlet and the power cord is unplugged
before removing the lid from the blender.
• Ensure the motor and the blades have
completely stopped before disassembling.
Ensure the Speed Control Dial is in the ‘OFF’
position and the blender is switched off
at the power outlet and the power cord is
unplugged from the power outlet before
attempting to move the blender, when
not in use, if left unattended and before
disassembling, cleaning or storing.