Kambrook KBL330, Инструкция пользователя

Страница: 8 / 24

7
Fig. 1
6. Use one hand to hold the jug
handle and the other hand
to turn the inner measuring
cap clockwise to ‘ ’ the
Removable Blade Holder (See.
Fig. 2).
Fig. 2
7. Once loose, tilt the Removable
Blade Holder at an angle and lift
it up and out of the jug body.
Operating Your Kambrook Blender
Before First Use
Remove and safely discard any
packaging material and
promotional labels. Disassemble the
blender jug by following the steps in
the ‘Disassembling the Blender’
section below. Wash the lid, inner
measuring cap, blender jug, silicone
seal and Removable Blade Holder
in warm, soapy water with a soft
cloth. Rinse and dry thoroughly.
Wipe the motor base with a damp
cloth and dry thoroughly.
Disassembling the Blender
1. Place the motor base on a flat,
dry surface such as a bench top.
Ensure that the Speed Control
Dial is in the ‘OFF’ position, the
appliance is switched off at the
power outlet and the power
cord is unplugged.
2. Lift the blender jug out of the
motor base to remove.
3. Remove the lid and inner
measuring cap from the blender
jug.
4. Place the jug upside down on
a flat, dry surface such as a
bench top.
5. Using the inner measuring
cap, insert the two tabs on the
inner measuring cap into the
Removable Blade Holder
(See Fig. 1).
WARNING: Blades must
be handled carefully as
they are sharp!