Kambrook DURAGLIDE KI820, Инструкция пользователя

Страница: 4 / 16

4
Kambrook Recommends Safety First
IMPORTANT: Please retain your
instruction book for future use.
At Kambrook, we believe that safe performance is the first priority in any
consumer product, so that you, our valued customer can confidently
use and trust our products. We ask that any electrical appliance that
you use be operated in a sensible fashion with due care and attention
placed on the following important operating instructions.
Important Safeguards For Your Kambrook
DuraGlide
™
Anodized Iron
• Carefully read all instructions
before operating the Kambrook
DuraGlide™ Anodized Iron for
the first time and save for future
reference.
• To protect against electric shock, do
not immerse the iron, cord or plug in
water or any other liquid.
• Do not use the iron for anything
other than its intended use.
• Always turn the Variable
Temperature Control to minimum,
then switch off at the power outlet,
then unplug the appliance when
not in use.
• Allow the iron to cool completely
before storing in an upright position
on its heel.
• Do not touch hot surfaces. High
temperatures are generated during
use, which could cause burns.
Always use the handle and warn
others (especially children) of the
possible dangers of burns from
steam, hot water or hot soleplate,
especially when ironing vertically.
• Regularly inspect the supply cord,
plug and actual appliance for
any damage. If damage is found
in any way, or the iron has been
dropped, immediately cease use
of the appliance and return the
entire appliance to your nearest
authorised Kambrook service centre
for examination, replacement or
repair.
• Store the unit out of reach of
children.
• Do not leave the appliance
unattended when in use.
• The iron must be used and rested on
a stable surface.
• When placing the iron on its stand,
ensure that the surface on which
the stand is placed is stable.
• The iron is not to be used if it has
been dropped, if there are visible
signs of damage or if it is leaking.
• Do not allow the iron to lay flat on
the soleplate when stored as water
may seep through the steam holes,
if the tank is not empty.