manualshive.com logo in svg
background image

5

• Always test the iron on a small, 

discreet part of the fabric to be 

ironed to ensure the temperature is 

not set too high.

• Always store the iron in the upright 

position on its heel. Do not leave the 

iron unattended while connected 

or on an ironing board.

• Do not use outdoors or in 

bathrooms.

• Do not store the iron with water in 

the water tank. Always empty the 

tank after use. Ensure the iron is cool 

before storing or wrapping the cord 

around the storage heel facility.

• Always switch off at the power 

outlet, then unplug the appliance 

from the outlet: 

- Before filling with water or  

 

  emptying it. 

- Before leaving it unattended. 

- Before cleaning and maintenance,  

  unless otherwise specified in this  

  booklet. 

- Immediately after use.

Important Safeguards For All Electrical 

Appliances

• Fully unwind the power cord before 

use.

• Do not let the power cord hang 

over the edge of a bench or table, 

touch hot surfaces or become 

knotted. 

• The appliance is not intended for 

use by persons (including children) 

with reduced physical, sensory 

or mental capabilities, or lack of 

experience and knowledge, unless 

they have been given supervision 

or instruction concerning use of the 

appliance by a person responsible 

for their safety.

• Children should be supervised to 

ensure that they do not play with 

the appliance.

• It is recommended to regularly 

inspect the appliance. To avoid a 

hazard do not use the appliance 

if power cord, power plug or 

appliance becomes damaged 

in any way. Return the entire 

appliance to the nearest authorised 

Kambrook Service Centre for 

examination and/or repair. 

• Any maintenance other than 

cleaning should be performed at 

an authorised Kambrook Service 

Centre.

• This appliance is for household use 

only. Do not use this appliance for 

anything other than its intended use. 

Do not use in moving vehicles or 

boats. Do not use outdoors. Misuse 

may cause injury.

• The installation of a residual 

current device (safety switch) 

is recommended to provide 

additional safety protection when 

using electrical appliances. It is 

advisable that a safety switch with 

a rated residual operating current 

not exceeding 30mA be installed in 

the electrical circuit supplying the 

appliance. See your electrician for 

professional advice.

Содержание DURAGLIDE KI820

















Отзывы: