16
4. Once locking tab is unlocked,
gently lift the plastic cover up and
pull completely away (do not
discard).
5. Remove the rotary brush by
gently pulling out from the turbo
brush head (see Fig.21).
Fig. 21
6. Remove hair, cotton and the likes
from the rotary brush by hand.
If debris is trapped, cut loose
with a pair of scissors and gently
pull free.
7. Refit the rotary brush to the
turbo brush head, by reinserting
into place. Replace the yellow
plastic cover, making sure it sits
flush into place (see Fig.22).
Fig. 22
8. Turn the locking tab to the ‘LOCK’
position. Refit the turbo brush
head to the stick vacuum body.
Make sure the turbo brush head is
properly assembled before use.
Cleaning the exterior
1. Wipe the stick vacuum exterior
with a soft, damp cloth. Never
use an abrasive cleaner. To store,
place stick vacuum onto the
charging base ensuring the stick
vacuum is switched to the ‘OFF’
position.
Caring for the battery pack
Your stick vacuum is fitted with a
removable battery pack. It is not
recommended that the battery
be removed unless it needs to be
replaced.
Battery pack replacements can
be purchased as a spare part by
contacting the Kambrook Service
Centre Department on 1300 139 798.
To replace battery pack, follow
instructions below:
1. Remove the hand vacuum from
the stick vacuum body.
2. Press down both battery pack
release buttons at once and slide
the battery pack away from the
hand vacuum (see Fig.23).
Fig. 23
Care, Cleaning and Storage
Continued...
Содержание Captiv2in1 Turbo KHV500
Страница 2: ...Instruction Booklet Captiv2in1 Turbo Stick Vacuum KHV500...
Страница 8: ...7...
Страница 20: ...19 Notes...