14
Care, Cleaning and Storage
If you encounter reduced vacuum
performance, check:
• Dust capacity in dust canister and
empty canister if full.
• Filter for dust and debris and clean
if required. Any clogging in the filter
will reduce the efficiency of your stick
vacuum.
For optimum performance, the dust
canister should be emptied and the
filter should be cleaned after each
use.
Emptying the dust canister
Switch the stick vacuum 'OFF' before
emptying the dust canister and
remove the handheld vacuum from
the stick vacuum body.
1. To empty the dust canister, press
downwards with your thumb on
the dust canister latch release
button located at the top of the
handheld vacuum handle. Use
your other hand to pull the dust
canister away from the handheld
vacuum pointing the nozzle
downwards to avoid spillage (see
Fig.16).
Fig. 16
2. Once the canister is removed,
remove the filter to access the
debris (See 'To clean the filter'
section).
3. Tip the debris from the dust
canister into the rubbish bin, lightly
tapping the sides if necessary to
dislodge. Hand wash the dust
canister with warm soapy water if
required and dry thoroughly.
4. Ensure the filter is cleaned
following the steps below and
replaced into the dust canister
before refitting onto the handheld
vacuum ready for next use.
To clean the filter
It is recommended to check and
clean the filters after each use for best
performance.
1. To clean the filter, with the dust
canister separated from the
handheld vacuum, hold the
dust canister with one hand and
remove the plastic filter from the
dust canister by gently pulling
outwards (see Fig.17).
Fig. 17
Содержание Captiv2in1 Turbo KHV500
Страница 2: ...Instruction Booklet Captiv2in1 Turbo Stick Vacuum KHV500...
Страница 8: ...7...
Страница 20: ...19 Notes...