Kambic KK-105 CH, Руководство пользователя

Страница: 34 / 38

User Manual
KK-105 CH
34
9. SERVICE AND
MAINTENANCE
WARNING
Before any service or cleaning be sure to disconnect the power supply
cable from the power supply!
Maintenance and service within the warranty period may only be performed by the authorized service
person.
Please advise Kambic in before alternation & modification. It is not allowed to change or rebuild any
part of the construction without producer's written permit.
All spare parts are in stock in the producer's magazine. It is only allowed to use the original spare
parts.
Maintenance and service within the warranty period may only be done by the producer’s service
department or authorized service.
With proper care the instrument should require very little maintenance. Keep the interior and the
exterior clean. For cleaning use some soft cleaning detergents and soft cloth.
Before starting the process check the level of distil water. Both level switches must be
covered with water! Use only distilled water!
Regularly check parts of cooling system and system for maintaining relative humidity.
At least once per six month check and clean:
-
Condenser blades (for cleaning use compressed air. (Blow from behind)
-
Release distilled water from water reservoir and if necessary clean reservoir
-
Release distilled water from water pool in chamber and clean pool
Water reservoir
Drain valve from reservoir
Cooling system condenser
(to be cleaned with compressed air)
In the event of failure, call the service;
Please find contacts on page 1 or on our web site: www.kambicmetrology.com