Kambic KK-105 CH, Руководство пользователя

Страница: 18 / 38

User Manual
KK-105 CH
18
5. INSTRUCTION
FOR USE
1. Connect the power cord into the power supply 230 V 50Hz.
3. Insert the material on the shelves and close the chamber doors.
4. Put the main switch in the position 1.
5. Select the desired program and press "START/STOP"
7. From this moment on the cycle runs completely automatically
8. Press "START/STOP" to stop the cycle
9. Use safety gloves to remove the material from the chamber
Transport is usually carried in the original packaging. In case that the appliance has to be replaced, it
must be manually placed on a transport palette and only then lifted and transported with a vehicle.
Installation must be done in a dry, well ventilated room.
Be sure that the seal is always clean and in superb condition!
Program selection and start
Turn on the main switch
Display:
T = 38.6°C = current air temperature in chamber
Rh = 61.9% = current relative humidity in chamber
07:18:19 = Time
22-09-15 = Date
Press to enter main menu
Display:
Press a number on a keyboard to enter in the selected sub-menu
ATTENTION:
Safety gloves use is highly recommended when working with high/low temperatures!
T = 38.6°C Rh = 61.9%
07:18:19
22-09-12
1 – START PROGRAM
2 – MANUAL
3 – PROGRAM SETUP
4 – SPECIAL SETUP
MENU