Kamado Joe KONNECTED JOE KJ15041123, Руководство пользователя

Страница: 21 / 56

21
Troubleshooting
SYMPTOM CAUSE POSSIBLE SOLUTION
Controller not ON Grill not powered ON Check switch on rear of grill.
Controller not powered ON Press power button on Kontrol Board.
Not plugged in Plug cord into rear of grill and into wall outlet.
Circuit breaker tripped Check wall outlet circuit breaker and reset if tripped.
Fan not ON Pit probe has reached the set
temperature
Once the set temperature is reached, the fan will turn off. Once
the cabinet temperature falls below the set temperature, the fan
will restart. The fan will continue adjusting itself automatically
to maintain the set temperature.
Dome lid open For safety, the fan should not stoke the fire when the lid is
open. Once the lid is shut, the fan will continue under normal
operation.
Lid switch not engaged Your lid switch may not be making contact when your dome
is closed. If the dome is closed and the fan is not ON when it
should be, you may need a new lid switch.
ERROR – Max Temp Fault P See below.
Slow heating Ash buildup from previous use Before starting your unit, remove any leftover ash from the
firebox and ash drawer that may be left from a previous cook.
Ash buildup can prevent proper charcoal ignition.
Low charcoal Refill firebox with charcoal.
Lid open Close lid.
Fan not on See fan not on section.
Element not ON AFS button not pressed Ensure AFS button was pressed
and button is glowing red.
Element damaged Turn off main power from grill.
Remove element from grill,
inspect for any visual damage.
Element not seated properly Turn off main power from grill.
Remove element completely
from grill, reconnect element to
grill and be sure to fully press
element into connectors.
ERROR: Probe Fault – P Pit probe faulty Check to ensure pit probe is plugged into rear of the grill.
Check to ensure pit probe connection is fully seated.
Check to ensure no debris is in the pit probe jack.
Unplug the unit from the wall, wait 10seconds and reconnect.
ERROR: Probe Fault - M Meat probe faulty Contact Kamado Joe Customer Support.
ERROR: Startup Time-Out Charcoal failed to ignite. Unit did
not reach 150F (65C) in under
10mins
Ensure old ash from previous use is not left in the firebox.
Ensure the AFS button was pressed and element is working.
Ensure proper vent placement for classic or automatic mode.
Ensure charcoal is not empty.
Restart
ERROR: Max Temp Fault – P Grill overheated Turn off grill.
Check for cause of overheat.
- Grease fire
- Fan malfunction
Eliminate cause of overheat.
Restart grill.
ERROR: Max Temp Fault - M Meat probe temperature above
300F (149C)
Using protective gloves, remove meat probe from unit.
Unplug from controller.
Allow meat probe to cool.