KAM LED White192 Panel, Инструкция по эксплуатации

Страница: 5 / 7

DMX mode introduction
The UV panel uses 3 DMX channels
Setting DMX mode
To activate the DMX mode dipswitch 10 must be in the on position, then use dipswitches 1-9 to set the DMX address.
DMX function
When DMX signal is present the Blue LED will flash.
Each fixture occupies 3 DMX channels.
DMX 512 signal can control multi fixtures.
If all units have same DMX address they will all work in sync.
If each unit has individual address then they can each be controlled separately.
Channel Value Function
1
000
Note: when
value 25-225
ch5 changes
speed of the
auto program
Black out
001 - 029 DMX control
030 - 059 Prog 1
060 - 089 Prog 2
090 - 119 Prog 3
120 - 149 Prog 4
150 - 179 Prog 5
180 - 209 Prog 6
210 - 239 Prog 7
240 - 255 Sound mode
2 000 - 255 Strobe / speed Slow to fast. From value 30 on ch1 this fader adjusts program speed
3 000 - 255 Dimmer 100-0% 255 = blackout