Panel
1
．
Switch on/off
2
．
Fused IEC power socket
3
．
DMX in
4
．
DMX out
5
．
Sound sensitivity control
6
．
DMX LED
7
．
Dipswitches
8
．
Power LED
Installation
When mounting the unit onto a truss or overhead rigging, ensure that a suitable mounting clamp is used and also
secure unit with safety chain. The angle of the unit can be adjusted by loosening the 2 thumb screws and tilting the
unit to the required position, tighten thumb screws to hold the selected position.
Multi-connectors methods
Several units can be linked together in DMX mode or master slave mode using a standard 3 pin DMX cable (not
supplied).
Controller/Master Light 1 Light 2
Light 3
