3
2
1
4
5
6
7
9
8
10
11
12
13
14
Proper laser set up & usage
This fixture has been designed to be hung. It is recommended for safety purposes, your lighting effect are properly mounted using
a suitable hanging clamp and safety cable. Items appropriate for safe and effective mounting are easily sourced from your lighting
vendor.
International laser safety regulations require that lasers must be operated in the fashion illustrated below, with a minimum of 3
meters (9.8 ft) of vertical separation between the floor and the lowest laser light vertically. Additionally, 2.5 meters of horizontal
separation is required between laser light and audience or other public spaces.
Front Panel
1.
Laser output – Laser output aperture
2.
Power – Red LED is ON
3.
Music – Synchronise to detected music signal
Rear Panel
4.
Switch – Power on and off
5.
Mains input with intergrated fuse holder
6.
DMX input - 3 PIN Male XLR
7.
DMX output – 3 PIN Female XLR
8.
ILDA input – Standard ILDA DB25 input
9.
ILDA through – Standard ILDA DB25 output
10.
Cooling fan – Never cover the fan
11.
Safety eye – Attach the safety cable
12.
LED function displaY
13.
Safety switch – turns unit off immediately
14.
Key switch
