KAM KCD450 USB, Инструкция по эксплуатации

Страница: 7 / 8

Front View
1. POWER ON LIGHT
It light up when the power is on.
2. DISC SLOT
Insert or remove the disc.
Rear View
1. LINE OUT (RCA Jacks)
The analogue audio from each CD player is output from these jacks. Connect to the line input of the mixer.
2. DIGITAL OUT
The digital audio from each CD player is output from this jack. Connect to the line input of the digital audio amplifier.
3. Remote
This connector is used for connecting to FADERSTART wire remote control unit. Connected to a compatible mixer remote start
socket.
4. Relay Connector
This connector is used for connecting to another CD player to allow the relay function to work. This must be of the same model.
5. POWER (Power Switch)
Press the power switch to turn the unit on, and the LED indicator will be light. To switch the POWER off by pressing the POWER
switch again.
6. AC Power Cord
Connect this power cord into an AC wall outlet with the proper AC voltage.