9. RELAY
Press the “RELAY” button to activate this function. When one unit is in play mode, and the other unit is in “pause” mode; pause
the playing unit, the other unit will automatically start to play.
*
It’s also for switching between the gain and the parameter of the digital effect showing in the display.
Note:
relay function is only available between 2 identical units.
10. SKIP
To select a track, a folder or a partition. Hold it and dial the jog wheel to fast search through the tracks.
11. TAP
Press this button with the beat to get the BPM of the music manually. Press and hold this button to activate Auto BPM.
12. DISPLAY
Indicates all the functions as they are occurring.
13. CUE
In pause mode, press this button to set a memorized point for instant play; in play mode, press this button to pause the music and
return to the memorized point.
Holding down this button will start the playback from the cue point. Releasing it will pause the track and return to the cue point.
After pressing this button to set the new cue, the stutter condition will be eliminated.
14. PLAY/PAUSE
Press this button to start the playback or pause playback.
15. PITCH ON/OFF
Press this button to activate or deactivate pitch adjustment.
16. PITCH RANGE
Switch the pitch range between 8%, 16 % and 100%.
When the LED light is off, it is set to under 8%.
When the LED light is on, it is set to under 16%.
When the LED light is blinking, it is set to under 100%.
17. MT
When this function is activated, the key of the song will be locked even though the pitch fader is adjusted.
18. PITCH BEND
Press
＋
to increase the speed and press to decrease the speed.
19. PROG
The maximum tracks that can be programmed are 99.
Start PROG-Edit:
In pause mode, press this button to edit program. The display MM:SS: FF position will show “P-xx” and then “xx” will flash. Select
a track by pressing SKIP (CD/MP3) or Folder-SKIP (only MP3) and then press this button to store it. Repeat the same process
and finally press this button again to finish a program.
Play PROG:
Press PLAY/PAUSE to play the program and PROG will flash in the display. Once the program playback has stopped, more
songs can be added to the program.
Exit PROG Play/Edit:
In pause mode, pressing this button for two seconds can return to the normal playback. Once returning to the normal playback,
pressing this button can enter the program again. You can continue the program playback, store more songs into the program or
wipe out the program in this condition.
20. OPEN/CLOSE
Press to eject the disc.
Note:
The CD can’t be ejected unless CUE or PAUSE button has been pressed first.
Содержание KCD450 USB
Страница 3: ...Description of the functions Top view ...
