Kalor Chiara 15, Руководство пользователя

Страница: 6 / 24

4
• Open the pellets tray (Pict. 3), remove the tray or shovel
(Pict. 4-9) and load the pellet (Pict. 10) - the cab apron
can take up to 3 kg pellets. Once you have loaded the
cab apron, empty it into the tank (Pict. 5). Repet this pro-
cedure more than once in order to load enough pellets to
grant an autonomous functioning of the insert.
Close the pellets tray (Pict. 8).
Pict. 10
Pict. 9
The pellets are cylinders of compressed wood, produced from sawdust and wood processing (chips and
sawdust), generally produced by sawmills and carpenters. The binding capacity of the lignin contained in
wood, allows to obtain a compact product without adding additives and foreign chemicals to the wood, is
therefore obtained a natural fuel with high yield.
The use of expired pellets or any other unsuitable material can damage parts of the Insert and
impair proper operation: this can lead to the termination of the guarantee, and its producer
responsibility.
For our products use pellets diameter 6 mm, length 30 mm and a
maximum of 6% and A1 certified according to the UNI EN ISO
17225-2 standard. Keep the pellets away from heat sources
and not in humid environments or with explosive atmosphere.
4.0 Pellet
5.0 Remote Control
The remote control (Fig. 3) used to adjust water temperature
power and the on/off functions for the pellet Insert.
To start the Insert, press key and the Insert will
automatically enter the starting phase.
Press keys + (1) and - (2) to adjust temperature, and
use keys + (6) and - (5) to adjust operating power.
To turn off the Insert, hold down key .
To replace the 3 volt battery located on the back of the
remote control, pull the centre of the cover and the lever
on the side of the same, replace the battery observing the
correct polarity (Fig. 4)
Fig. 3 Fig. 4
• Keep/store the pellets in a cool dry place;
• Keep the fuel and other infl ammable materials off the insert.
!
EN