INSTALLATION INSTRUCTIONS
Wooden Vanity & Pre-Cut Marble Top
1147083-2-
B
3 of 6
Questions? Problems? For additional assistance, please contact KALLISTA’s Customer
Service Department at 1-888-4KALLISTA (1-888-452-5547) or FAX 1-888-272-3094.
1.
ALL PREPARATION
36-1/4"
(921 mm)
2x6 Backing Material
Measure and mark 36-1/4
″
(921 mm) up from the
fl
oor. This will be the height from the top of the 2x6
backing material to the
fl
oor.
Secure the 2x6 backing material to the studs with framing nails.
Install the water supply and drain lines. The water supply nipples must extend at least 3
″
(76 mm) beyond
the
fi
nished wall material.
Complete the
fi
nished wall. Make sure that the
fi
nished wall is straight and plumb, and that the
fl
oor is
fl
at
and perpendicular to the
fi
nished wall.
IMPORTANT!
Do not install any moldings that may inhibit the vanity from being plumb against the
fi
nished
wall.
