INSTALLATION INSTRUCTIONS
Deck-Mount Handshower Trim
1491201-2-
A
3 of 8
Questions? Problems? For additional assistance, please contact KALLISTA’s Customer
Service Department at 1-888-4-KALLISTA (1-888-452-5547) or kallista.com.
1. INSTALL THE MOUNTING BRACKET
Insert the escutcheon shank through the hole of the deck. Ensure the O-ring is in the groove under the
escutcheon.
From underneath the deck, slide the washer and thread the nut onto the shank. Tighten the nut.
Thread the hose guide onto the shank and handtighten.
From the top of the bath or finished deck, insert the smaller end of the flexible hose through the
escutcheon.
From the underside of the bath or finished deck, insert one washer into the flexible hose.
Tighten the flexible hose onto the water source.
Run cold and hot water through the hoses to flush out dirt and debris.
Insert a washer in the top end of the hose and thread the handshower holder onto the flexible hose.
Insert a screen washer into the handshower holder and thread the handshower handle into the handshower
holder.
To avoid kinking, remove any twists or loops in the hose.
Check for leaks and for smooth operation. Perform any necessary repairs or adjustments.
