English |
33
Bosch ebike Systems
0 276 001 XXX | (17.1.11)
17
Upper holder of the standard battery
18
Standard battery
19
Bottom holder of the standard battery
20
Carrying strap
21
Battery charger
Technical Data
Assembly
f
Place the battery only on clean surfaces.
In
particular, avoid contaminating the charge
socket and the contacts, e.g. by means of
sand or ground.
Checking the Battery Before Using for
the First Time
Check the battery before charging it or using it
with your eBike for the first time.
For this, press the On/Off button
14
to switch
on the battery. When no LED of the charge-con-
trol indicator
13
lights up, the battery may be
damaged.
f
Do not charge a damaged battery and do
not use it.
Please refer to an authorised bi-
cycle dealer.
When at least one, but not all LEDs of the
charge-control indicator
13
is lit, then fully
charge the battery before using for the first
time.
Charging the Battery
f
Use only the charger listed on the graphics
page.
Only this charger is matched to the
lithium-ion battery used in your eBike.
Note:
The battery is supplied partially charged.
To ensure full battery capacity, completely
charge the battery in the charger before using
for the first time.
The battery must be removed from the eBike for
charging.
For charging the battery, read and observe the
operating instructions of the battery charger.
The battery can be charged any time without re-
ducing the battery life. Interrupting the charging
procedure does not cause damage to the bat-
tery.
The battery is equipped with a temperature
control indicator, which enables charging only
within a temperature range between 0 °C and
40 °C. This provides for a long life of the
battery.
Charge-control Indicator
When the battery is switched on, the five green
LEDs of the charge-control indicator
13
indicate
the charge condition of the battery.
In this, each LED indicates approx. 20 % capac-
ity. When the battery is completely charged, all
five LEDs light up.
Additionally, the charge condition of the
switched on battery is indicated on the drive
HMI. Read and observe the and operating in-
structions of the drive unit and the drive HMI.
When the capacity of the battery is below 5 %,
all LEDs of charge-control indicator
13
on the
battery go out; however, the drive HMI does pro-
vide an additional indication.
Lithium-ion battery
Battery Pack
Article number
– Standard battery,
black
– Standard battery,
white
– Standard battery,
silver
– Rear rack battery
1 270 020 500
1 270 020 501
1 270 020 502
1 270 020 503
Rated voltage
V=
36
Rated capacity
Ah
8
Energy
Wh
288
Operating temperature
°C
–10...+40
Storage temperature
°C
–10...+60
Allowable charging
temperature range
°C
0...+40
Weight
kg
2.5
Degree of protection
IP 54 (dust and
splash water
protected)
OBJ_BUCH-1407-001.book Page 33 Monday, January 17, 2011 2:58 PM
Содержание BionX
