English |
29
Bosch ebike Systems
0 276 001 XXX | (17.1.11)
Error Code Indication
The components of the eBike drive are continu-
ously and automatically monitored. When an er-
ror is detected, the respective error code is in-
dicated in display
e
.
Depending on the type of error, the drive is au-
tomatically shut off if required. Continued travel
without assistance from the drive is possible at
any time. However, have the eBike checked be-
fore attempting new trips.
f
Have all inspections and repairs carried out
only by an authorised bicycle dealer.
When
an error is still displayed despite corrective
measures, please also refer to an authorised
bicycle dealer.
Code
Cause
Corrective Measure
001
Internal error of the drive
HMI
Have the drive HMI checked
002
One or more buttons of the
drive HMI are blocked.
Check if any buttons are blocked, e.g. from dirt or
debris. Clean the buttons, if required.
003
Connection problem of the
drive HMI
Have connections and contacts checked
100
Internal error of the drive unit Have the drive unit checked
101
Connection problem of the
drive unit
Have connections and contacts checked
102
Error of the speed sensor
Have the speed sensor checked
103*
Connection problem of the
lighting system
Have connections and contacts checked
104
Connection problem of the
drive HMI
Have connections and contacts checked
105
Temperature of the drive unit
too high (above 40 °C)
Allow the drive unit to cool down. Continued travel with-
out assistance from the eBike drive is possible and
speeds up the cooling of the drive unit.
200
Internal electronics error of
the battery
Have the battery checked
201
Temperature of the battery
too high (above 40 °C)
Allow the battery to cool down. Continued travel without
assistance from the eBike drive is possible and speeds
up the cooling of the battery.
202
Temperature of the battery
too low (below –10 °C)
Allow the battery to warm up slowly in a warm location.
203
Connection problem of
battery
Have connections and contacts checked
204
Incorrect battery polarity
Charge the battery with the original Bosch charger as
described in the operating instructions.
* only for eBike lighting via battery (country-specific)
OBJ_BUCH-1407-001.book Page 29 Monday, January 17, 2011 2:58 PM
Содержание BionX
