Kali Audio LP-UNF Users’ Guide
7
Inputs and Controls
Front Panel
LED Indicator
Center LED On: Power On
The single center LED indicates that the LP-UNF is powered on. If you do not
wish to have a constant power indication, you can turn this LED off by flipping
DIP switch #8, on the back of the speaker, up.
Output Level
Press either the “+” or “-” sign on the front of the unit to display current output
level. The output level will not change on the first press. Quickly press either
the “+” or “-” signs to change the output level by one step. Each of the 11 LEDs
on the front panel has 3 level steps (dim, medium, bright) for a total of 34 out-
put level steps. A full chart of how much each step changes the output level
Mute
Quickly press both the “+” and “-” signs at the same time. The speaker will
mute, and the front LEDs will pulse between on and off, indicating Mute status.
Press either the “+” or “-” sign again to unmute the speaker.
Bluetooth Pair
Hold both the “+” and “-” signs for 3 seconds. The front LEDs will flash on and
off, indicating that the speaker is in Bluetooth pairing mode. Find the LP-UNF
in the Bluetooth menu on your device to pair.
Bluetooth Unpair
Bluetooth is not a professional audio protocol. If you’re finding that Bluetooth
functionality is negatively affecting the function of the LP-UNF, you may disable
the Bluetooth connection. To do this, pair the LP-UNF with your device. From
your device’s Bluetooth menu, forget the LP-UNF. Forgetting the LP-UNF while
it is paired to a device will disable Bluetooth, and the Bluetooth antenna will
remain off until the LP-UNF is once again put into pairing mode.
