Kali Audio LP-UNF Users’ Guide
10
Inputs and Controls
DIP Switch Quick Reference Guide
The quick reference guide on the back of the speaker can help you set the DIP
switches to the appropriate positions for your application without needing to
consult this manual.
DIP Switches
The DIP switches control the Boundary EQ, HF and LF Trim, and power to the
RCA input. A full explanation of the operation of the DIP switches can be found
Output to Secondary
Plug the included 4-prong connector (10) into this output, and plug the other end
into “Input from Primary” (9) on the passive unit. It does not matter which end
goes into which speaker.
Power Input
Connect the provided power supply (12) to this input.
TRS Inputs
The TRS input is for use with professional audio devices like mixers, interfaces
and controllers. Be sure to use TRS cables and not TS cables for best results.
Consumer devices that use 3.5 mm or RCA cables should be routed through the
RCA inputs, and not the TRS inputs.
RCA Input
The RCA input is for use with consumer devices like record players, laptops,
smart phones, and media players. Commonly, the playback device will either
have an RCA or a 3.5 mm (Aux) output. Cables from either of these outputs to
RCA are easy to find.
USB-C Input
The USB-C input allows you to connect to a computer or a tablet without needing
a seperate audio interface. Use with an Apple iPad will require a camera adapter
kit, sold seperately. Use with certain smartphones may be possible, but is not
supported.
On/Off Switch
Power the speaker on and off. Be sure to power the speaker off when connecting
or disconnecting the power cable, during lighting storms, or during extended
periods of disuse.
