Kali Audio LP-UNF Users’ Guide
11
Inputs and Controls
Input from Primary
Plug the included Phoenix connector (10) into this output, and plug the other end
into “Output to Secondary” (3) on the powered unit. It does not matter which end
goes into which speaker.
4-Prong Connector
Plug one end of this cable into into “Output to Secondary” (3) on the powered
unit. Plug the other end into “Input from Primary” (9) on the passive unit. It does
not matter which end goes into which speaker.
This cable should be long enough to accomodate ultra-nearfield use as Kali has
prescribed. Longer cables and replacement cables are available at KaliAudio.
com.
Local Power Cable
This features an IEC Connector, and the LP-UNF ships with whatever plug your
country uses. If you use the LP-UNF in a place with a different plug, you may
purchase a local IEC cable. The IEC connector connects to the power supply (12)
and the prongs go into an AC power outlet.
24V Power Supply
This is a 3A, 24V DC 72W power supply. Plug the barrel connector into the pow-
er input (4) on the powered unit, and connect the local power cable (11) to the
prongs on the other end. If you lose your power supply, you may replace it with
another power supply of the same electrical specification. The barrel connector
on the power supply is 2.5mm wide by 5mm deep, and the pin is positive.
