Kalfire Gi105/59F, Инструкция пользователя

Страница: 9 / 52

9
request Kalfire to assume responsibility for doing so (only valid in the
Benelux, Germany, France and the United Kingdom).
11. Verification or repair of an entire gas fire or parts thereof can only take
place by appointment, after prior consultation between Kalfire and the
installer approved by Kalfire.
12. A dated proof of purchase must be presented to Kalfire should a possible
home repair service (only available in the Benelux, Germany, France and the
United Kingdom) be carried out within the warranty period.
13. In the event of home repair service outside the warranty period, material
costs, working hours and call-out charges will apply.
The warranty is not applicable in the following circumstances:
1.
If the warranty provisions have not been complied with, in part or in full.
2. If alterations to the appliance have been brought about without Kalfire’s
written permission to do so.
3. If the appliance passes into new ownership.
4. If the appliance has not been fitted according to the Installation Manual
and/or has not been used according to the user instructions.
5. Should deviation from the Kalfire specifications have occurred in any way
or form during installation of the concentric flue duct system.
6. Should deviation from the Kalfire specifications have occurred in any way
or form during configuration of the decorative elements, including possible
ceramic wood logs on the burner bed.
7. Damage attributable to external causes (shocks, lightning, falling, flooding
or overheating of the appliance) during transport, storage or installation.
8. Should the appliance be impacted by neglect, improper use and/or gross
negligence.
9. If the repair or delivery of individual parts be carried out by another
manufacturer or by a professional technical fitter who has not been
approved by Kalfire.
1.4 Gi fireplace compatibility
Besides the remote control, you can also operate the fireplace with an external
device (e.g. tablet, phone). This connection can be established by connecting
the Gi fireplace directly to the router with a UTP cable or through a wireless Wi-
Fi connection. In case the fireplace is connected wirelessly to the home router,
in some cases the WiFi connection may not work properly. This may be caused
by insufficient coverage (signal) of the WiFi network or because connected
devices (u.w. phone, tablet, router) are not compatible. Connection via a UTP
cable is therefore always preferred.