![background image](http://html1.mh-extra.com/html/kaleidescape/m700/m700_replacement-instructions-manual_3267714016.webp)
KVAULT ODD Replacement
December 2020
101-0269-00 Rev 2
Page 16 of 24
6.
When removing the rear ODD bracket, it is important not to move the
roller bracket or knock the sensor board.
To do this carefully:
1) lift the rear ODD assembly straight up slightly
2) shift the assembly to the rear
3) tip back the top of the assembly a few degrees
4) lift the assembly
See Figure 24.
Figure 24
7.
Using a 1.5mm hex screwdriver, remove the optical disc drive from
the bracket by removing the two top screws with washers. Be sure to
retain the two washers on the top screws.
Figure 25