LIGHTING CARE INFORMATION
E v e r y A L L E G R I ® f i x t u r e i s o f h e i r l o o m q u a l i t y a n d w i l l l a s t f o r g e n e r a t i o n s . T o e n s u r e i t r e t a i n s i t s b r i l l i a n c e a n d
splendor for years to come, proper care and regular cleaning are necessary.
It is recommended that ALLEGRI® fixture, and particularly their crystal trim, be lightly dusted with a feather or lambs wool
d u s t e r , o r s o f t b r u s h e v e r y t w o m o n t h s , o r w h e n e v e r i t a p p e a r s d u l l o r d u s t y . A t h o r o u g h c l e a n i n g s h o u l d b e
completed every six months.
Before cleaning an ALLEGRI® fixture, first locate the fixture's trim diagram. This will assist in replacing the crystal trim in
its proper location after cleaning. Should a replacement trim diagram be required, please call
866-820-2665 to speak with an ALLEGRI® customer service representative, who can provide a new diagram.
ALLEGRI ® recommends several dif f erent cleaning met hods, depending on t he t ype of f ixt ure. Some f ixt ures can be
cleaned with limited removal of crystal, while others must be completely untrimmed.
Place a soft towel or blanket directly beneath the fixture to limit the damage to both the crystal and the surface below the
fixture, should a piece of crystal be dislodged during the cleaning process. Extreme care must be taken around any
electrical fixture. For personal safety and the safety of the fixture, be sure that the fixture has been turned off. Never rotate or
spin the fixture as this can cause the fixture to lose support and fall. Instead, move around the fixture while cleaning.
White Glove Method
Prepare a cleaning solution of one part isopropyl alcohol to three parts distilled water and place in a clean spray bottle.
Do not use packaged cleaning fluids, as many of these contain ammonia, which may degrade the finish of the fixture and
the quality of the crystal.
Wearing white cotton gloves, spray one glove with the solution and keep one dry. Gently polish each crystal with the damp
g l o v e a n d i m m e d i a t e l y w i p e i t w i t h t h e d r y g l o v e . D o n o t t u g o r p u l l o n t h e c r y s t a l , a s t h i s m a y c a u s e t h e
connectors to chip or crack the crystal, or dislodge it from the fixture.
Warning: To reduce the risk of personal injury due to fire and/or electric shock, never spray solution at or near the fixture.
Crystal Removal Method
Gently remove trim and hand-wash the crystal in lukewarm water using a mild detergent. Rinse in clean water and dry with a
s o f t c l e a n c l o t h . D o n o t s o a k f i n i s h e d c r y s t a l s u c h a s S W A R O V S K I E L E M E N T S C o l o r s : T e a k , G o l d e n S h a d o w o r
Silver Shade, for extended periods, as this may degrade the crystal's finish.
With the fixture untrimmed and turned off, wipe the frame, including the light bulbs once they are completely cool, with a soft
cloth.
Wearing white gloves, finger-cots or using a soft clean cloth, gently replace the trim as directed in the trim diagram.
WWW.ALLEGRICRYSTAL.COM
866.820.2665
P6
