12
3 To Begin with
Please read this section carefully before using this cell phone. This section will instruct you how to insert
and unlock SIM Card, tell you the information about digital GSM network, how to install and maintain your
phone battery and how to charge the battery.
3.1 Battery
Please run out the battery power for the first use and then charge it completely for use again; repeat this
course for continuously three times, the battery will come to the best state of use.
3.1.1 Load and Unload the Battery
Unloading steps: First pull the battery cartridge cover downward and then raise the protruding part of
battery upward and take it out.
Loading steps: First clip the upper part of battery into the slot and then load the lower part of battery to
place.
3.1.2 Charge the Battery
z
Insert the charger to the power supply;
z
Insert the charger plug into the mobile phone faucet;
z
Then the power indication symbol on the right upper corner of mobile phone screen will flicker; if the
phone is powered off when it’s charged, the screen will still display the charging symbol. If the cell phone
is still used with low power, the power indication symbol will only appear on the screen after the battery is
charged for a period of time;
z
When the power indication symbol on the right upper corner of mobile phone screen is full and does not
flicker again, it indicates the charging is completed. If the phone is powered off when it’s charged, the
screen still displays the charge completeness prompt. Charging will last for 2-3 hours. It’s normal that the
battery, mobile phone and charger get warmer during charging;
z
When charging is completed, please disconnect the AC mains socket, mobile phone and charger.
Warning
: Please put the mobile phone in a well-ventilated place with the temperature between -40
0
C and +55
0
C during charging,
use the charger supplied by the mobile phone manufacturer. Use of the charger not recognized may lead to hazards and violation of
recognition and warranty clauses of this mobile phone.
3.1.3 Battery Use
Please charge the battery when your mobile phone powers off automatically or it warns “Low Power” on a
timely basis. The cell phone will automatically adjust to reduce the charging time if the battery power has not
run out before charging.
The phone standby time and service time presented by the phone manufacturer are based on the ideal
operating conditions. And in actual practice, the operating hours of battery vary as per the network status,
operating conditions and modes of use.
3.2 Network Connection
3.2.1 SIM Card
This unit is a dual SIM phone; your network operator will provide two plug-in SIM Cards for your mobile
phone. The SIM Card serves as the key for you to access the digital GSM network. Please insert the effective
SIM Card into the mobile phone before using it, and you can insert two SIM Cards at the same time, switch to
dual SIM modes and single SIM card mode, etc. in ON state.
Any information about network connection and your call records, as well as the names, phone numbers and
short message received and saved in the cards, are saved in SIM Card. SIM Card may be take out from your
mobile phone, and put into any GSM mobile phone for use, the new mobile phone will automatically read the
SIM Card.
To prevent your message in the card from missing and damaging, never touch the metal plane of card and
