23
8.1.1.4 SMS Counter of SIM Card 1
z
Sent
: Record the quantity of sent short message.
z
Received
: Record the quantity of received short message.
You can click
RESET
with the touch pen to separately clear these two short message counters.
8
.1.1.5 GPRS Counter of SIM Card
z
Sent last time
: Record the bytes sent last time.
z
Received last time
: Record the bytes received last time.
z
Send all
: Record the total bytes sent.
z
Receive all
: Record the total bytes received.
z
Clear the counter
: Clear the data and re-counter.
8.2 General Call Settings
8.2.1 Call Settings of SIM Card 1
z
Local number
¾
System pre-settings
: Sending the number or not applies the default value.
¾
Hide the number:
The opposite party cannot see this phone number during calls, it shall be
supported by the operator.
¾
Send number:
The opposite party may see this phone number during calls.
z
Call waiting
: You can choose to turn on or off the call waiting functions, select INQUIRY to check the
current call waiting status.
z
call forwarding
¾
Unconditional forwarding
: When this function turns ON, the incoming calls may be forwarded to
the phone number you pre-set in any case.
¾
Forward upon contact failure:
When this function turns ON, the incoming calls may be forwarded
to the phone number you pre-set when the caller cannot contact with you.
¾
No Answer Forward:
When this function turns ON, the incoming calls may be forwarded to the
phone number you pre-set when your mobile phone does not answer the calls.
¾
Forward on busy:
When this function turns ON, the incoming calls may be forwarded to the phone
number you pre-set when your mobile phone is busy.
¾
Forward all data incoming calls:
When this function turns ON, the incoming calls may be
forwarded to the phone number you pre-set when the incoming calls are data calls.
¾
Cancel to forward
: Cancel all call forwarding services.
z
Call barring:
Restrict the calls to be dialed.
¾
Barring Outgoing calls:
Restrict the outgoing calls.
¾
Barring incoming calls
: Restrict the incoming calls.
¾
Cancel the barring:
Cancel the pre-set barring by inputting the password.
¾
Change the password:
Change the password.
z
Line Switching
: You can switch to Line 1 or 2, and Line 1 is the default one.
Note: If Line 2 is selected, ability to make outgoing calls depends on the services provided by network operator.
z
Close the groups:
You can select the group list to be closed.
