KAKA Industrial TGK-08, Руководство по эксплуатации, Страница: 5 / 44

designed.
29.Secure workpiece. Use clamps or a vise to hold the workpiece when practical. A
secured workpiece protects your hands and frees both hands to operate the machine.
30.Don’t overreach. Keep proper footing and balance at all times.
31.Many machines will eject the workpiece toward the operator. Know and avoid conditions
that cause the workpiece to “kickback”.
32.Always lock mobile bases (is used) before operating machinery.
33.Be aware that certain dust may be hazardous to the respiratory systems of people and
animals, especially fine dust. Make sure you know the hazards associated with the type
of dust you will be exposed to and always wear a respirator approved for that type of
dust.
34.This band saw is used to cutting common metal material, please don’t used to cut
agricultural / fishery products, wood, food, combustible material, radioactivity metal.
35.Please lock all the covers, the blade guard should be close to the workpiece.
36.Don’t open the cover when machine is running.
37.Blade condition, don’t operate with dull, cracked or badly worn blade. Inspect blades for
cracks and missing teeth before each use.
38.Hand placement, never position fingers or thumbs in line with the cut. Hands could be
crushed in vise or by falling machine components or cut by the blade.
39.Entanglement hazards, don’t operate this band saw without blade guard in place.
Otherwise, loose clothing, jewelry, long hair and work gloves can be drawn into working
parts.
40.Blade replacement. When replacing blades, make sure teeth face toward the workpiece.
Wear gloves to protect hands and safety glasses to protect eyes.
41.Workpiece handling, wlways support the workpiece with table, vise or other support
fixture. Flag long pieces to avoid a tripping hazard. Never hold the workpiece with your
hands during a cut.
42.Loss of stability, unsupported workpieces may jeopardize machine stability and cause
the machine to tip and fall, which could cause serious injury.
43.Power interruption, unplug machine after power interruption. Machines without
magnetic switch can start up after power is restored.
44.Fire hazard, use extreme caution if cutting magnesium. Using the wrong cutting fluid will
lead to chip fire and possible explosion.
45.Cutting fluid safety, always follow manufacturer’s cutting safety instructions. Pay
particular attention to contact, contamination, inhalation, storage and disposal warning.
Spilled cutting fluid is a slipping hazard and a toxicity hazard.
46.Maintenance/service, all inspections, adjustments, and maintenance are to be done