KAKA Industrial TGK-08, Руководство по эксплуатации, Страница: 16 / 44

5.6 Blade speed
Please adjust proper feeding distance and speed according to material and shape.
Usually our TGK-4220/TGK-4235/TGK-4240 have two blade speeds, of course, we can use
a servo motor, then you can change blade speed by speed adjustment knob.
Note:
only change speeds while the motor is running. Changing speeds when machine is
off may result in damage to your machine.
To change blade speeds:
1. Turn the band saw ON and allow it to come up to speed.
2. A. For two saw blade speeds: turn the blade speed switch to “1” position for low speed;
turn the blade speed switch to “0”position, the saw will stop run; turn the blade speed
switch to “2” position for high speed. (see figure 1)
B. For variable blade speeds: turn the speed adjustment knob (see figure 2),
clockwise to decrease blade speed and counterclockwise to increase blade speed.
Figure 1 Figure 2
5.7 Feed rate
The speed at which the saw blade will cut through a workpiece is controlled by blade type,
feed rate, and feed pressure. The feed rate is controlled by feed rate dial.
To set the feed rate:
1. Raise the bow to the highest position. You can set the highest position through adjust
the position of top limit ring, when the bow raise, the top limit ring touch the top limit