background image

kaivac

cleaning

systems

TM

P a g e   ǀ  

9

www.kaivac.com

©2020 Kaivac, Inc. All Rights Reserved

1.4  s

Afety

 p

ReCAUtions

: b

AtteRy

 U

nits

 o

nLy

When using an electrical appliance, basic precautions should always be followed, including the following:

WARNING: To reduce the risk of fire, electric shock, or injury:

• 

ONLY USE with Kaivac, Inc. battery, and charger, CHARG36V series.

• 

When charging, make sure charger has at least 6 inches of clearance on all sides for adequate air flow.

• 

DO NOT charge batteries outdoors.

• 

DO NOT attempt to repair, service or modify the batteries or charger. Contact Kaivac Technical Support with any issues.

• 

DO NOT short-circuit the battery or charger terminals with conductive items such as paper clips. This can deliver high        

current, resulting in hear and fire.

• 

Keep sparks and flames away from batteries.

• 

DO NOT crush, drop, incinerate or damage the Battery. Do NOT use a Battery that has been damaged in any way. DO NOT 

incinerate the battery even if it is non-working or severely damaged. The battery can explode in a fire.

• 

DO NOT expose a Battery or appliance to fire or excessive temperature. Exposure to fire or temperature above 2650F (1300C) 

may cause explosion.

• 

DO NOT use or store the NTC System or Battery in wet or moist conditions, or near flammable or combustible materials.

• 

DO NOT charge or store Battery for extended time (1 month or more) in temperatures below 400F (40C).

• 

If fumes smelled from battery, discontinue use immediately, place inside a metal canister in a well-ventilated area.

• 

Prevent unintentional starting. Ensure the switch is in the off-position before connecting to battery, picking up or carrying 

the appliance. Carrying the appliance with your finger on the switch, or energizing an appliance that has the switch on invites 

accidents.

• 

Disconnect the battery from the appliance before making any adjustments, changing accessories, or storing appliance. Such 

preventive safety measures reduce the risk of starting the appliance accidentally.

• 

When battery is not in use, keep it away from other metal objects like paper clips, coins, keys, nails, screws or other small 

metal objects that can make a connection from one terminal to another. Shorting the battery terminals together may cause 

burns or a fire.

• 

Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with 

water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.

• 

Do not use a battery or appliance that is damaged or modified. Damaged or modified batteries may exhibit unpredictable 

behavior resulting in fire, explosion or risk of injury.

C

harger/Electrical Warnings:

• 

For commercial or residential use.

• 

Connect charging cord to a properly grounded outlet only. See Grounding Instructions.

• 

DO NOT plug in Charger while Vacuum Head is in ON position. It may damage the system.

• 

Follow all charging instructions and do not charge the battery or appliance outside of the temperature range specified in the 

instructions. Charging improperly or at temperatures outside of the specified range may damage the battery and increase 

the risk of fire.

• 

DO NOT leave charger plugged in when not in use.

• 

DO NOT operate charger if it has received a sharp blow, been dropped, or damaged in any way.

• 

DO NOT use charger if it has a damaged cord or plug

DO NOT carry charger by cord.

• 

DO NOT pull on charger cord to unplug. Grasp and pull the plug, not the cord. 

• 

DO NOT handle charger, including charger plug and charger terminals, with wet hands while charger is plugged in or while 

inserting plug into electrical outlet.

Vacuum and operation warnings:

• 

NO COMBUSTIBLES! Sparks inside the motor can ignite flammable vapors or dust. Do not use near combustible liquids and 

gases, or to pick up explosive dusts or gasoline. Do not pick up anything that is burning or smoking such as cigarettes or hot 

ashes.

• 

DO NOT plug Battery in while Vacuum Motor is in ON position. It may damage the system.

IMPORTANT SAFETY INSTRUCTIONS — SAVE THESE INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING (THIS APPLIANCE)

1.0  Getting Started

Содержание 1250







































Отзывы: