Kaiser EH 6337 Series, Руководство пользователя

Страница: 16 / 84

16
EN
INSTALLATION OF THE OVEN
The oven can be installed under a work top or in a
cooking column. Figure shows the installation
dimensions. Make sure that surrounding materials
are heat resistant. Align the oven centrally with
respect to the side walls of the units surrounding it
and fix it in place with the screws and Allen screws
provided.
See the accompanying instructions for combining
the oven with multi-functional gas or gas-electric
cookers.
PREPARATION
Clean the oven thoroughly with soapy water and
rinse well. To remove the lateral frames from
smooth-walled ovens, proceed as shown in the
figure.
Operate the oven for about 30 minutes at
maximum temperature to burn off all traces of
grease which might otherwise create unpleasant
smells when cooking.
Important!!!
As a safety precaution, before cleaning the oven,
always disconnect the plug from the power socket
or the power cable from the oven. Do not use acid
or alkaline substances to clean the oven (lemon
juice, vinegar, salt, tomatoes etc.). Do not use
chlorine based products, acids or abrasive
products to clean the painted surfaces of the oven.
Attention! To install the appliance is not
recommended the use of the silicone or
other sealants and other adhesives besides
the supplied mounting materials. If
additional fastening materials and
substances have been used, the removing
the device from the mounting niche in case
of necessary service is provided by and at
the expense of the owner. The manufacturer
and the customer services are not
responsible for damages of equipment and
furniture because of the disassembling.