Kaiser+Kraft QUIPO QUICK-LIFT ESGH 1000 I, Руководство по эксплуатации

Страница: 62 / 182

high-lift pallet truck
5
Subject to change without notice
Check all parts of the pallet truck for wear and replace defective
parts where necessary
annually
Change oil in the hydraulic system
Check readability of type plate.
Authorise inspection by competent technical expert
The service life of yourhigh-lift pallet truck is limited. Worn parts must be
renewed in adequate time.
VIII. Oil and lubricant recommendations
Hydraulic oil: ISO VG 46
Lubricant: Multipurpose lubricating grease for example: ARAL Aralub 2, BP
Multipurpose lubricating grease L2, Energrease LS 2, ESSO Beacon 2
The oil level should be checked every six months. The following oil types are to
be used depending on the temperature conditions.
Temperature Oil
-5°C – approx. +45° C L-HL 68 Hydraulic oil (equivalent to ISO VG68)
-15°C - approx. - 5° C L-HL 46 Hydraulic oil (equivalent to ISO VG46)
Waste oil must be disposed of in accordance with legal provisions!
IX. Malfunctions and their causes
Failure Cause Elimination
Motor and hydraulic
pump does not
operate
Defective fuse Replace the fuse
Loose or unconnected plug Reconnect
Motor is burned out
Replace motor
The high-lift pallet
truck does not lift the
load, although the
pump is working
perfectly
Load is too heavy, overload valve is
actuated
Reduce the load
Lowering valve does not close any more
or the valve face is not sealed because of
dirt
Clean or replace it
Electric circuit is disconnected Check the wiring
Electromagnetic switch KM is defective Replace KM
Up switch is obstructed resp.defective
Check resp. replace
the switch
Hydraulic pump does not work Check the pump
The high-lift pallet The fork or other parts are obstructed Check all moving
parts