Kaiser+Kraft QUIPO QUICK-LIFT ESGH 1000 I, Руководство по эксплуатации

Страница: 59 / 182

high-lift pallet truck
2
Subject to change without notice
II. Handle adjustment
There are 3 different positions with different functions for the Control
Handle (49
).
Position 1:
to raise the forks
Position 2: to drive the unit
Position 3: to lower the forks
Test different functions by putting the Handle (49) in 3 different positions
respectively.
If it does not function properly, then adjust the Nut (36).
Problems Turning direction
of Nut
(36)
Fork not lifted
up
-
(counter-clockwise)
Fork not
lowering down
+
(clockwise)
Slow lifting no
function
+
(clockwise)
Quick lifting
no
function
-
(counter-clockwise)
III. When to add oil
If the fork can’t be pumped up to its rated highest position, you may have to add
hydraulic oil into the oil tank. The hydraulic fluid to be used must have a quality of
ISO VG32 or equivalence, its viscosity should be 1,5 – 3,5. Mixing of different fluids
is prohibited!
3
2
1
Picture 1
Release
Lever
NO.49
Picture 3
Add
Hydraulic
Oil