Kaiser+Kraft QUIPO QUICK-LIFT ESGH 1000 I, Руководство по эксплуатации

Страница: 58 / 182

high-lift pallet truck
1
Subject to change without notice
GB
Operating manual
* * * * *
Safety instructions
IMPORTANT:
The instructions and safety instructions in this operating manual must be
followed to the letter. Failure to follow them or incorrect operation or abuse may
result in danger.
for the operator or third parties
- for the unit and other property of the operator
The unit may only be operated and serviced by persons
- who are trained to do so
- who have read and understood this operating manual
- who are acquainted with the safety regulations governing their work station
- who have a suitable work station and tools
I. Instructions for safe operation
Please refer to all the warning symbols and notes in this description and on the unit
before you commission it.
1. PEOPLE OTHER THAN THE OPERATOR MUST KEEP A SAFE DISTANCE
FROM THE UNIT WHILST IT IS OPERATING.
2. ONLY PEOPLE ACQUAINTED WITH THE UNIT SHOULD BE ALLOWED TO
OPERATE IT.
3. DO NOT COMMISSION THE UNIT UNTIL YOU ARE CONVINCED THAT IT IS
PERFECT CONDITION. PAY SPECIAL ATTENTION TO THE CONDITION OF
THE WHEELS, THE LEVER DEVICE, THE FORKS AND THE RAISING AND
LOWERING CONTROL.
4. NEVER USE THE UNIT ON SLOPES.
5. ENSURE THAT PARTS OF THE BODY BECOME CAUGHT IN THE LIFTING
MECHANISM, UNDER THE FORKS OR UNDER THE LOAD. NEVER
TRANSPORT PEOPLE ON THE UNIT.
6. THE OPERATOR SHOULD WEAR GLOVES AND SAFETY SHOES FOR HIS OR
HER OWN SAFETY.
7. NEVER TRANSPORT UNSTABLE OR LOOSELY STACKED OBJECTS.
8. NEVER OVERLOAD THE UNIT.
9. NEVER LOAD THE PLATFORM ON ONE SIDE OR MAKE IT TOP-HEAVY OR
PLACE LOADS THAT STICK OUT OVER THE EDGE OF THE PLATFORM.
10.THE CAPACITY OF THE UNIT ASSUMES THAT THE LOAD WILL BE
PERFECTLY BALANCED FOR TRANSPORT WITH THE CENTRE OF
GRAVITY IN THE CENTRE OF THE FORKS AT THE FRONT.
11.ENSURE THAT THE LENGTH OF THE FORKS IS THE SAME AS THE LENGTH
OF THE PALLET.
12.LOWER THE FORKS AS FAR AS POSSIBLE WHEN THE UNIT IS NOT IN USE.
This pallet truck lifting by both manual and electric, lowering by manual.