Kaise SK-8551, Инструкция по эксплуатации

Страница: 6 / 68

SK-8551
英文取説【第
1
版】
_P4
4
OPERATING PRECAUTIONS
Cautions for Handling
●
Do not apply the engine oil to the metal part of the Battery Clips or USB Plug to prevent
contact failure.
●
Do not apply engine oil, gasoline, antifreeze or battery fluid to the instrument to prevent any
damage on its surface.
●
Do not polish the case with the fluid that contains alcohol to prevent the cracking.
● Use this instrument under the environment of -10 ℃ to 50 ℃ , 80 ％ RH or less to obtain the
accurate measurement. (Printer is operating at 0 ℃ to 50 ℃ )
●
Cables which coating are heat damaged might cause the short circuit. Do not use them and
replace into the new ones.
●
Disconnect this instrument from battery soon after finishing the test to prevent trouble of this
instrument and running out of battery power.
●
Do not touch the inside of the printer with finger to prevent trouble of this instrument.
● Do not put serious pressure on Printer Lever or Printer Cover to prevent trouble or damage to
this instrument.
● If Date and Time are not able to set, built-in battery for backup is exhausted. Ask KAISE
AUTHORIZED SERVICE AGENCY through your local dealer for repair service.
● Keep this instrument in supplied Carrying Case to avoid malfunction of the printer trouble
by dust penetration.
● Insert battery cable deeply into the unit, and fix the screw tightly. Loose
connection may cause the measurement failure.
●
Keep clean the battery cable, connection plugs, and terminals. Dusts may cause
the contact failure.
●
Do not connect battery cable oppositely. This may damage the unit and the cable.
●
Do not tighten the battery cable screw too strongly. This may damage the screw
or contact part of the unit, and makes them unfixable.
●
Use genuine printer paper (model : 851). Using other paper could cause printing error or
device failure.
●
Do not apply mechanical shock.
The shock such as dropping or beating might
damage the instrument and may cause the
trouble.
●
Do not pull cables forcibly.
Pulling the cables forcibly, such as when
removing the Battery Clips from the battery or
USB Plugs from USB Port, may cause trouble
such as the breaking of wire.
Cautions for Safekeeping
●
Keep away the instrument
from the following place.
・
Dusty area
・ The place where has the water splash
・
The place where applies the hard shock
・ -20 ℃ or less, 60 ℃ or more, 70%RH or more
・
The place where has the condensation
・ The place where is exposed to direct sunlight