3.
Electrical parts
Note: Remove the panel plate and fan assembly (refer to 1. Panel plate and 2. Fan assembly) before
disassembling electrical parts.
KWX-09/12/18HRDO,
Procedure
Illustration
1) Remove the connector for the
compressor (see
CJ_ODU_INV_010
).
2) Pull out the two blue wires connected
with the four way valve (
CJ_ODU_
INV_010
).
3) Pull out connectors of the condenser
coil temp. sensor(T3),outdoor ambient
temp. sensor(T4) and discharge temp.
sensor(TP) (
CJ_ODU_INV_010
).
4) Disconnect the electronic expansion
valve wire (
CJ_ODU_INV_010
).
5) Then remove the electronic control
box (see
CJ_ODU_INV_010
).
4-Way Valve
Compressor
T3, T4, TP
Electronic Expansion Valve
CJ_ODU_INV_010
Page 53
M
ai
n
te
n
an
ce
a
n
d
D
is
as
se
m
b
ly