4.
Fan motor and fan
Note: Remove the front panel, electrical parts and evaporator (refer to 1. Front panel, 2. Electrical parts, and
3. Evaporator). before disassembling fan motor and fan.
Procedure
Illustration
1) Remove the two screws and remove the
fixing board of the fan motor (see CJ_AF_
INV_018).
2) Remove the Bearing sleeve(see CJ_AF_
INV_019).
3) Remove the fixing screw (see CJ_AF_
INV_020).
4) Pull out the fan motor and fan assembly
from the side.
Screws
CJ_AF_INV_018
CJ_AF_INV_019
Fixing Screw
CJ_AF_INV_020
Note: This section is for reference only. Actual unit appearance may vary.
Page 38
M
ai
n
te
n
an
ce
a
n
d
D
is
as
se
m
b
ly