Kaindl SSG 600 A-DC, Руководство по эксплуатации

Страница: 12 / 28

K
AINDL
-S
CHLEIFTECHNIK
B
EDIENUNG
Adjustment of inside tooth
Open motor fixation screw (pic. 2/39)
Place motor to graduation 0. The grinding wheel must show to the right side.
Open fixation of transport cylinder (pic. 2/51)
Adjust the feed cylinder on the piston rod side, in order the fixation lever is parallel to the outer edge
of the saw blade and fix again.
Transport the saw blade by using the feed lever (pic. 2/53) to the stop dog (pic. 4/79). Pay attention
that the ball is pressed inside it’s sleeve completely.
Compress the cylinder and then move back the unit with feed lever (pic. 2/53) by adjusting how
many teeth should be transported per feed. Now fix the cylinder with the clamping lever.
Test manually by moving forward the feed lever to the stop dog, if the adjusted number of teeth are
transported correctly.
Adjust angle of inside tooth as per the specification of the saw blade manufacturer with the fixation
screw of the porting arm (pic. 2/50)
You can find out the angle by feeding inside. The tooth must be parallel to the grinding wheel.
Limit the grinding depth with the depth stop (pic. 3/70)
Check the adjustments of grinding and transport manually
12