K
AINDL
-S
CHLEIFTECHNIK
B
EDIENUNG
Adjustment and grinding the outside tooth
Open fixation screw of the motor (pic. 2/39)
Turn the motor to position 0, the grinding wheel must be on the left side
Open fixation screw (pic. 2/50), move porting arm (pic. 1/19) to the left and adjust at position:
grinding the back of tooth, angle adjustment (pic. 7)
Adjust the tooth transport, in the way, that the correct number of teeth are transported.
Picture 7
Alternating angle back of tooth
Phase angle back of tooth
Alternating- and phase angle are adjusted with the motor in relation to the motor scale (pic. 8)
Direction!
As the original angles for grinding the back of tooth, the alternating- and phase angles are often
unknown, copy these angles from the tooth of the saw blade. We propose you, to note these angles
in a list. (see pic. 7 + 8)
Phase angle 45 ° below: grind over the back edge of the diamond coating
Phase angle 45 ° upside: grind of the front edge of the diamond coating
Picture 8
Tooth distance
30°
30
15°
-8° +25°
Grinding of
back of tooth
Angle of inside tooth
Alternating angle inside
tooth
14
Содержание SSG 600 A-DC
