Remove preservation (grease film).
Independing with which type of motor the machine is equipped with, please check:
a)
is your electric current identical to the data on the nameplate of the motor.
b)
when you have a 400 V phase motor, pay attention to a correct connection
of the rotating field.
c)
Sound check, Mounting and dressing of the grinding wheel
(see page 25)
On the back of the machine you find the electric switch with positions:
I - ON, 0 - OFF (400 V phase motor).
In this manual, the following safety symbols are used. These symbols shall attract the
attention of the reader to the text beneath. These symbols indicate to existing danger for
life and health of persons!
2.
EXPLANATION OF SAFETY ICONS
5
Eye protection during
grinding against
kicked around
particles
Gerneral danger
When moving the
machine, disconnect from
electric current.
Laser beam
warning
1.5
START UP
CAUTION!!!
Lens cover always must
be kept close when not in
use! (danger of fire from
sunbeam)