Kaindl BSG 60, Руководство по эксплуатации, Страница: 25 / 29

25
After you have moved the machine to it's final place, take out the grinding wheel and
make a "sound check" with it. Also make an optical check, regarding perhaps damages.
After this, mount the grinding wheel on the support.
26.
MOUNTING AND DRESSING OF GRINDING WHEEL
BEFORE STARTING UP THE MACHINE
The picture shows the mounting of the grinding wheel on the
support (Picture 2, item 2-5). Please pay attention, that the
screw (Item 4) has a right-hand thread.
Place the included plastic spacers between support and
grinding wheel. After the mounting of the grinding wheel,
loosen both hat cao screws with a 1 0 mm open-end spanner
or combination wrench and pull off the grinding wheel cover to
the left side.
Place the new grinding wheel on the motor shaft and tighten
up the allen screw M8. Now re-mount the grinding wheel over
in reverse order and check, if the grinding wheel cover is
mounted is mounted correctly.
Never operate the BSG 60 with a not correctly
mounted grinding wheel cover.
After you have mounted the grinding wheel correctly, you
have to dress the grinding wheel.
Fix the dresser gyro in the prism, adjust the
prism support to
118°
, lock with the fixation
screw in hole
A
.
Turn the clearance angle adjustment to pos.
3,5
. Prism rest to
0
(Picture 3). Move the
prism feed towards the grinding wheel, so
that the diamond touches the grinding wheel
and starts to rotate. Move the motor feed
with the grinding wheel to the left and the
right, unit the grinding wheel it clean and
dressed.
ATTENTION: feed carefully (only feed 2­3
graduation lines) with the prism feed.
11 8 Grad
3,5
0°
Bild 1
Bild 2
Bild 3