1.
SET UP
The machine is packed in a box placed on a pallet. Unpack the machine at the final
working place. Before starting, please check the machine for transport damage.
Use the drill grinding machine only in dry rooms.
Environmental temperature from +5 to +50°C, Humidity: up to 90%, not condensing
The BSG 60 is a table machine, may attention to a safe stand on your work table.
The place has to grant a vibration-free running of the machine.
Check if the grinding wheel is turning free (eventually move back the prism support) in
case you don´t pay attention to this, the grinding wheel pay be damaged. For continuous
operation, please attach a suitable dust exhaust.
During all grinding work, wear safety glasses. Please read this manual. For damage
caused by lack of knowledge or not following the operation manual, we do not assume
any responsibility.
The drill grinding machine BSG 60 is exclusively determined for occasional grinding of
spiral, step-, wood-, Forstner-, sheet metal-, and stone (carbide) drills and countersinks.
The directed use includes also reading this operation manual, as well as keeping all
containing directions of use - especially the safety information. For all material- and
personal damages, arising by not intended use, note the manufacturer, but the operator
is responsible.
The use as a table machine for manually guided grinding of workpieces, such as chisel,
sheet metal, screws driver, etc. is not allowed!
1.1
ENVIRONMENTAL CONDITIONS FOR SET UP
4
1.2
SAFETY ADVICE
1.3
DIRECTED USE
1.4
PREDICTABLE WRONG APPLICATION