-5-
Ɣ%ODGHLQVWDOODWLRQ'LVDVVHPEO\
Figure 1
Figure 2
Figure 3
Figure 4
Figure 1
Figure 2
Figure 3
Figure 4
&DPHUDGLVDVVHPEO\
1. Use screwdriver to loose the camera in anti-
clockwise direction.
2. Take out the camera.
NOTE: Please make sure the drone is off while mount/dismount the camera.
NOTE: It is important for the correct blade to be put on the correct motor or the
drone will not fly correctly. A letter is marked on each blade to indicate
which motor it should go on.
%ODGHLQVWDOODWLRQ
1.Insert the blade into main axis as figure (1)show.
2.Insert the main axis sleeve into main axis tube as figure (2) show. Make
sure the notch of the main axis sleeve match with the hole on the main axis
tube and then insert the iron axis.
3.Install the iron axis inside the main axis sleeve then rotate it in clockwise
direction in 90°as figure (3) show.
4.Insert the blade cover into main axis as figure (4) show.
%ODGHGLVDVVHPEO\
1.Pull out the blade cover as figure (1) shows.
2.Rotate the main axis sleeve in counterclockwise direction until the iron axis
is match with the notch on the main axis sleeve as figure (2)show.
3.Pull out the iron axis according to figure (3) show. And pull out the main axis
sleeve.
4.Pull out the blade as shown in figure (4).
