-6-
Ɣ3URWHFWVKLHOGLQVWDOODWLRQGLVDVVHPEO\
Ɣ0RWRULQVWDOODWLRQ'LVDVVHPEO\
Figure 1
Figure 2
Figure 1
Figure 2
3URWHFWVKLHOGLQVWDOODWLRQ
3URWHFWVKLHOGGLVDVVHPEO\
1.Insert protect shield into the slot on the drone as shown in figure (1).
2.Use screwdriver to tighten the screw on the protect shield in clockwise
direction as shown in figure (2).
1.Use screwdriver to loose the protect shield in anti-clockwise direction.
2.Take out the protect shield.
,QVWDOODWLRQ
1.Insert the motor to the motor base then use screwdriver in clockwise
direction to tighten the screws on the front side of the motor as figure (1)
show.
2.Plug the motor to the motor socket as figure (2) show.
3.Close the motor cover then use screwdriver in clockwise direction to tighten
it as figure (3) show.
See diagram below:
