KaiCong SIP1018, Руководство пользователя

Страница: 24 / 53

Kaicong-Nothing important than safety!
Anything else ,please contanct me.
7.1.4 UPnP Setting
UPNP stands for universal plug and play, if you start UPNP, once the
KAICONG™
SIP1018 is connected into the LAN, it will communicate with the router in the LAN
automatically. It will request the router to open a port to forward its own port. It is no need
for the users to log in the router to set the port forwarding. Below
Figure 16, tick “Using
UpnP to Map Port” and the setting are completed. You could check the UpnP succeeds
or not in the interface of System Maintenance.
Figure 16
Before using UPNP function, please make sure the router’s UPNP function has been
triggered. Because there are so many different routers, and not all of them can support
UPNP. Please test if the router work well with the equipment, if not, we would suggest
you don’t enable this function.
7.1.5 DDNS Setting
Please refer to the content in 6.2.
7.2 Alarm Settings
7.2.1 Alarm Setting
1
）
Alarm Detect
User can select the motion detect to enable monitor a certain area, if anything happens
in that area, it will trigger the alarm. In the motion detect sensibility, the smaller the figure,
the more sensitive it is.
As showed in picture 4, if external alarm detector was connected to the device, user will
be able to tick the scheduler for alarm. If the external alarm detector is an always on
switch alarm. Please choose “open”. If the external alarm detector is always off switch
alarm, please choose “close”.
2
）
Alarm Action
After every trigger of alarm during the scheduled time, the device can trigger alarm in
several ways.

IO interface for alarm signal output: when relay was switched on (please refer to
Picture 3), the external alarm will begin to alarm.

Send alarm info by email.

Send the site pictures to the FTP server, user can also set the break time between
two pictures.

Send alarm info to the alarm server.