KaiCong SIP1018, Руководство пользователя

Страница: 9 / 53

Kaicong-Nothing important than safety!
Anything else ,please contanct me.
different LANs.
2) And these 2 LANs are already connected to the Internet. In order to get the LANs to
be connected to the Internet, they are required to be equipped with router and to
apply for the communication link from the local Internet Service Provider (ISP) and
connect to it by ADSL or optical fiber, etc.
3) PC-3 is connected to the Internet.
4.2 Visit Instruction
To visit the
KAICONG™ SIP1018, you should do some settings of KAICONG™ SIP1018
and Internet besides getting the communication link fluency.
1) The PC and
KAICONG™ SIP1018 are in the same LAN.
If you want to use this PC
to visit the
KAICONG™ SIP1018, you need to make sure their IP address is at the
same segment. Otherwise you need to do the reset of the
KAICONG™ SIP1018’s IP
address. For example, the
KAICONG™ SIP1018-1’s IP address in Figure 5 is
192.168.1.139 (at the segment of 192.168.1), while the PC-
1’s IP address is
192.168.0.175 (at the segment of 192.168.0), then you will be not able to visit the
KAICONG™ SIP1018 through the PC-1. You need to change the KAICONG™
SIP1018-
1’s IP address to 192.168.0.139 firstly.
2) The PC and
KAICONG™ SIP1018 are in different LANs, but they are all
connected to Internet. For the
KAICONG™ SIP1018-1 and PC-2 in Figure 5, if you
want to visit
KAICONG™ SIP1018-1 by PC-2, you should firstly do the setting as 1)
to make sure that you can visit
KAICONG™ SIP1018-1 through PC-1 and then do
the setting of router-1 (do the port forwarding from the router). The PC-
2’s visit
application could be sent through router-1 to
KAICONG™ SIP1018-1. Normally,
PC-2 could only send the information to router-
1, if you don’t do the setting of
router-1, then PC-2 could not visit
KAICONG™ SIP1018-1.
5
Visit
KAICONG™ SIP1018 from LAN
5.1 Set IP Address
The IP addresses of
KAICONG™ SIP1018 and PC should be at the same segment, for
Figure 5, the
KAICONG™ SIP1018-1 can’t be visited. Run the BSearch_en.exe in the
CD, click Search button, and then select the
KAICONG™ SIP1018-1 to reset the IP
address, as the Figure 6.
Setting Instruction:
 Please carefully check the “Local PC information” on the top left corner which lists
the PC configuration. If there are several network adapters in the PC, please select
the one you are using and make sure the IP address of
KAICONG™ SIP1018 is as
the same segment of the PC.
 Change the content of “IP config” on the right to make sure the content is the same